Warranty Jobs
- Thread starter chartrock
- Start date
:focus: Got on to the repair dealer today. It appears all things are going to be fixed, including a couple I didn't mention earlier. My dolly wheel had collapsed when the tightening handle just shot out of the nut and stripped the thread, dropping the van on the draw bar. I managed to buy another handle in Kalgoorlie and also bought a tap to rethread the nut on the draw bar.
Another thing was a small hole in the tent part of the pop top so we will be getting a whole new vinyl tent. Repairs have been done on the fibreglass on the roof and side wall and will be 'two-packed' when the firm goes back to work after 9th January. The shower wall has been removed and reglued.
Apparently the movement in the floor is common as it seems a join in the timber floor is right under this point but the only way to fix it is another beam underneath but our water tank is in the way. Don't know about this one.
We have also requested a window to be fitted in the side wall and have been quoted $617 for this. :yield:
Hopefully it will all be good by mid to late January.
ray:
Another thing was a small hole in the tent part of the pop top so we will be getting a whole new vinyl tent. Repairs have been done on the fibreglass on the roof and side wall and will be 'two-packed' when the firm goes back to work after 9th January. The shower wall has been removed and reglued.
Apparently the movement in the floor is common as it seems a join in the timber floor is right under this point but the only way to fix it is another beam underneath but our water tank is in the way. Don't know about this one.
We have also requested a window to be fitted in the side wall and have been quoted $617 for this. :yield:
Hopefully it will all be good by mid to late January.
ray:
Hi Paul
We are also waiting to hear from Michael to see if jayco will repair our bed lid. it is good to see they are going to sort yours out
Enough so that if Elaine is standing at the sink and I walk behind her, she feels the floor move. Annoys the hell out of her!
Good on you bud, that one photo already has me excited. I noticed the little plastic step to help get in and out of the van, must be a good lift!
Hi Chartrock, did you get your floor fixed. Ours flex as well as we walk over it. i was thinking about letting Jayco in Brisbane know about to see what they say about it and see if they can fix it.
We also had the floor bounce and make a loud crack when getting out of bed in the mornings, so I put an extra light weight C channel beam in.
Christian
Christian
I think I might have to do the same. Did it take most of the flex out of the floor?.
Thanks Christian
Thanks Christian
No change in the floor, still flexes and squeaks. I'm told that the water tanks stop extra cross members being fitted but I might get under and try Stone Stomper's fix.
Hi Four of us, yes the two extra beams has taken all the mounce out and also no more cracking noise.
Christian