AzHaych's new 18.58.1OB Club Lounge

Crusty181

Well-Known Member
Feb 7, 2010
6,854
13,971
113
Mentone, VIC
The dinette comes standard with a bed converta now. I sat in the Club lounge and there is heaps of room, we will fit 5 adults comfortably. I didnt know that they didnt do the vent in the door. Diesel heater would fix any draft that comes in.
;) yes indeed

We still have a vent, but its in the actual back of the step area and not in the door itself. The door vent is much easier to block off from dust sandwich a piece of foam ... not sure how I'm going to deal with ours.
 
  • Like
Reactions: AzHaych

AzHaych

Well-Known Member
Mar 15, 2013
349
603
93
51
Beaconsfield, Vic
Hey @AzHaych just over 24hrs till handover, must be getting very excited.......
Yes mate, getting very close now. I have my "Burnsie Checklist" all printed off and ready to go, just going to give the Disco a quick tub in the morning for the photos and then head over to Page Bros.
I'm going to put it over the weighbridge on the way home to check the numbers before I load all the gear into it over the weekend.

Thanks for the checklist bud
 
Last edited:

AzHaych

Well-Known Member
Mar 15, 2013
349
603
93
51
Beaconsfield, Vic
Sorry about the delay guys. Handover went really well only a couple of minor things that I listed in the earlier post. The few items that will be done at the first service are
-Second picnic table to be installed in lieu of it being installed where I didnt want it.
-Replace rear bar with "Black" bar as stated on my sign off form (Plain Gal is on it now)
-Edge trim around Club Lounge table is overlapped on the join
-Dinette table is too tight as the bed converta (fits but its tight)
-Drifter panel and hot water switch to be moved next to the TV
-Gas bottle cover to be fitted to drawbar
Overall we are really happy with the finish, I couldn't really pick anything wrong with the finish. Thanks to @burnsie's checklist we went over every cupboard, drawer, fitting and appliance and all was good.
All the cupboards have been fitted out with shelves and now saved me some money on not having to fit them out and we got a filtered fresh water tap that we never optioned or payed for.

So here are some pics @Aussiejet

IMG_1571.JPG


IMG_1576.JPG

IMG_1578.JPG

IMG_0369.JPG

IMG_1588.JPG


IMG_1590.JPG


IMG_1591.JPG


IMG_1592.JPG




IMG_1593.JPG
IMG_1594.JPG
IMG_1595.JPG
IMG_1599.JPG
IMG_1601.JPG
IMG_1602.JPG
IMG_1603.JPG
IMG_1604.JPG
IMG_1606.JPG
IMG_1610.JPG
 
Last edited:

AzHaych

Well-Known Member
Mar 15, 2013
349
603
93
51
Beaconsfield, Vic
Thanks mate, Melbourne Grandfinal weekend we are getting away to Mulwala on the Murray for an extended long weekend. Leaves me this weekend and next to pack it out and fit the new waterproof bed ends.
 
  • Like
Reactions: bigcol and burnsie

JMS Project

Active Member
Jun 14, 2015
128
52
28
54
Dayboro
Awesome Az... Looks great.

Hey would you mind flicking me the Check List you were referring to ? Would it be easier to flick to my email ?

Love the tug by the way. I have a D3, and a Defender 110 for my work car. Well, that's what told Mrs Accountant I needed for a work car anyway. Haha
 
  • Like
Reactions: AzHaych

AzHaych

Well-Known Member
Mar 15, 2013
349
603
93
51
Beaconsfield, Vic
Nice mate, bit of a relief to ill bet. Nice touch with the fishing show on tv.

Thanks mate, it is great to finally get it home.

and the Stella!

Had to break her in with a beer first!

Love the tug by the way. I have a D3, and a Defender 110 for my work car. Well, that's what told Mrs Accountant I needed for a work car anyway. Haha

Love the Disco Steve, I thought my old STX550 was best tow vehicle on the planet until I got the Disco!
 
  • Like
Reactions: Crusty181

AzHaych

Well-Known Member
Mar 15, 2013
349
603
93
51
Beaconsfield, Vic
extremely nice.. looks good with the Disco love that lounge

Thanks Dave, absolutely stoked with the club lounge, we sat in it for awhile tonight and it was really comfortable. The table is definitely smaller than a dinette table but plenty big enough for us. It actually just pops off the pole and then removing the pole it becomes a bed convertor or remove entirely for more room. I'll take some pics on the weekend, it works really well.
 

Crusty181

Well-Known Member
Feb 7, 2010
6,854
13,971
113
Mentone, VIC
Love the Disco Steve, I thought my old STX550 was best tow vehicle on the planet until I got the Disco!
Yup
Thanks Dave, absolutely stoked with the club lounge, we sat in it for awhile tonight and it was really comfortable. The table is definitely smaller than a dinette table but plenty big enough for us. It actually just pops off the pole and then removing the pole it becomes a bed convertor or remove entirely for more room. I'll take some pics on the weekend, it works really well.
Thats a logical and practical design!!, Is there an extra cushion floating around fro the convertor. The table look similar in size to ours, and to be honest we thought it a "touch" on the smaller side. Although we could squeeze too many people on the couch for the table size, in practical terms and on a normal "non squeeze" day its fine
 

formyfamily

Member
Aug 8, 2015
61
12
8
NSW
Yes mate, getting very close now. I have my "Burnsie Checklist" all printed off and ready to go, just going to give the Disco a quick tub in the morning for the photos and then head over to Page Bros.
I'm going to put it over the weighbridge on the way home to check the numbers before I load all the gear into over the weekend.

Thanks for the checklist bud
Could I please get a copy of your checklist too? this will be our first van and first adventure I to camping, we feel we are going on a bit blinded, just the little things we are aware of, like needing hoses?!?!
 

formyfamily

Member
Aug 8, 2015
61
12
8
NSW
Sorry about the delay guys. Handover went really well only a couple of minor things that I listed in the earlier post. The few items that will be done at the first service are
-Second picnic table to be installed in lieu of it being installed where I didnt want it.
-Replace rear bar with "Black" bar as stated on my sign off form (Plain Gal is on it now)
-Edge trim around Club Lounge table is overlapped on the join
-Dinette table is too tight as the bed converta (fits but its tight)
-Drifter panel and hot water switch to be moved next to the TV
-Gas bottle cover to be fitted to drawbar
Overall we are really happy with the finish, I couldn't really pick anything wrong with the finish. Thanks to @burnsie's checklist we went over every cupboard, drawer, fitting and appliance and all was good.
All the cupboards have been fitted out with shelves and now saved me some money on not having to fit them out and we got a filtered fresh water tap that we never optioned or payed for.

So here are some pics @Aussiejet

View attachment 35539

View attachment 35540
View attachment 35541
View attachment 35542
View attachment 35543

View attachment 35544

View attachment 35545

View attachment 35546



View attachment 35547 View attachment 35548 View attachment 35549 View attachment 35550 View attachment 35552 View attachment 35553 View attachment 35554 View attachment 35555 View attachment 35556 View attachment 35558
Photos look great.
 
  • Like
Reactions: AzHaych