G'day all
Here are a few snaps of something I made up to hold hoses due to the limited boot space in 17.56.1
Hopefully it is easy to see what's going on. Any questions please let me know. Basically the mesh was slid down the 3 brackets holding the water tank. This allowed the tank to be the rear wall for the rack and the mesh could hinge off the brackets to swing down and allow access. I folded the other 3 sides up by hand.
The mesh sits below the tank and the plate that protects the tank so it won't rub or put a hole in the tank. I have cut the rear top corners out of the mesh so it won't rub on the tank either.
I'm looking at better options than the heavy rubber straps to hold the rack up. We just travelled 1000 kms and there were no issues with the integrity or security of the mod.
I have also added a photo of the pole carrier I fixed behind the second wheel. I was able to use the existing elements of the van and not have to drill extra holes - which was great!
I have had the van axle underslung from new so that gives a bit more clearance - similar to an OB I suppose.
Anyway I hope the photos uploaded ok - first time!! Oh and if anyone has any suggestions on how to improve or reasons not to have the mod please let me know!!!
cheers
Sinko






Here are a few snaps of something I made up to hold hoses due to the limited boot space in 17.56.1
Hopefully it is easy to see what's going on. Any questions please let me know. Basically the mesh was slid down the 3 brackets holding the water tank. This allowed the tank to be the rear wall for the rack and the mesh could hinge off the brackets to swing down and allow access. I folded the other 3 sides up by hand.
The mesh sits below the tank and the plate that protects the tank so it won't rub or put a hole in the tank. I have cut the rear top corners out of the mesh so it won't rub on the tank either.
I'm looking at better options than the heavy rubber straps to hold the rack up. We just travelled 1000 kms and there were no issues with the integrity or security of the mod.
I have also added a photo of the pole carrier I fixed behind the second wheel. I was able to use the existing elements of the van and not have to drill extra holes - which was great!
I have had the van axle underslung from new so that gives a bit more clearance - similar to an OB I suppose.
Anyway I hope the photos uploaded ok - first time!! Oh and if anyone has any suggestions on how to improve or reasons not to have the mod please let me know!!!
cheers
Sinko





