I'm after some advice about wiring up a hotwire. I have been told by the auto sparky I can get away with wiring up a 6 b@s cable directly from the tug battery to the 12 pin plug via a fuse which will be the cheapest about $100. The most I will be traveling for will be about 11 hrs before I plug into 240v. I was told that if I didn't disconnect the van when I stopped for a long period of time I could drain the tug battery without an isolator.
Would this be ok to do as I will only be doing fairly short trips? Any advice would be great...Thanks
Would this be ok to do as I will only be doing fairly short trips? Any advice would be great...Thanks