14' Series Tool Boxes

Craig and Leanne

Craig and Leanne

Member
Aug 20, 2016
69
25
18
49
Yackandandah
Anyone made up tool boxes for the draw bar or rear bumper? intrested to see who has done what with this as I am keen to get one for the drawbar to hold the weber on on side and generator on the other with gas bottles in the middle. Havent looked at measurements yet so not sure if it's even possible.
 
Dobbie

Dobbie

Well-Known Member
Jun 18, 2014
3,061
5,872
113
Yes. Lots of members here have done them so best idea is to do a search for toolboxes.

Lots of variations, designs, some standard, some custom made, some expensive, some very expensive . ...go get 'em!
 
  • Like
Reactions: bigcol and Craig and Leanne
bigcol

bigcol

Well-Known Member
Nov 22, 2012
6,814
10,164
113
Swan Valley Perth
17triton said:
Doesn't really matter if it's 14ft or 22ft the as they are just about the same out the front, the main thing is weather or not you have the extended drawbar or not so happy searching guys.
Click to expand...

the reason for this is..............

extended draw bar has more room on the front - to fit a box

the standard draw bar WILL fit a box on it - just need to be very very careful turning on full lock (hey @dagree )
but it can be done

main difference (irrespective of 12' or 22') is if it has the bed at the front...... some 12' & 14' dont have bed at the front - only at the rear

with the bed at the front, you only have approx. 510mm from top of draw bar to under side of door for bed
 
MDS69

MDS69

Well-Known Member
Jul 6, 2014
733
803
93
Have a look at the bottom of this page for "similar threads" for more reading material.
 
You must log in or register to reply here.
Top Bottom