Rg Colorado Firewall Gromet

[boots33]

For anyone needing to run extra wiring. With the auto model you can get easy access to the inside of the cab if you remove the plate that covers where the clutch would have been. Just two bolts and the plate comes off and leaves you with a nice hole around 37mm diameter. then you can get one of these for a very neat finish.

 

[Drover]

Didn't think of feeding thru there, damn handy, I just ran everything thru the grommet in the passengers floor pan.

 

[boots33]

Yes a very convenient spot for the wiring and that grommet is a tape on variety which gives good dust and moisture resistance.

 

[Drover]

I have looked at that cover as a spot to mount a bracket for my catch can as well.

 

[boots33]

yes that might be a good spot. I think i could still mount one there as well Not a lot of spare room under the bonnet