Hayman Reese WDH Long Dropshank

[17triton]

Gday just looking for a long dropshank for a hayman reese hitch. I put a ARB rear bar on the triton and need more length to level the van out as it is 100mm higher.

 

[17triton]

Still looking.

 

[Brad]

I would have thought the Jayco outlet would have one.

 

[17triton]

Jayco only have the new style shank, there is a trailer place here that sells them but I thought $240 just for the shank was a bit steep, I have just found a couple on eBay starting at $130 so I will keep an eye on those, one was pickup only and both were in Queensland .

 

[dagree]

Matt,
Is this the one you need http://caravansplus.com.au/catalog/product_info.php?products_id=9519 ?
It says it is a 40mm offset but that is from the the third hole down below the shaft centreline.
From memory the 6th hole was 100mm.

It is the same as the one needed when I lifted my previous 100 series but no longer need.

Looking for $100 for it but the unfortunate thing is postage from Perth to Ballarat may be expensive and not worth it for something that weighs around 7 kilo's.

Cheers,
David

 

[17triton]

Matt,
Is this the one you need http://caravansplus.com.au/catalog/product_info.php?products_id=9519 ?
It says it is a 40mm offset but that is from the the third hole down below the shaft centreline.
From memory the 6th hole was 100mm.

It is the same as the one needed when I lifted my previous 100 series but no longer need.

Looking for $100 for it but the unfortunate thing is postage from Perth to Ballarat may be expensive and not worth it for something that weighs around 7 kilo's.

Cheers,
David

Thanks mate I bit the bullet yesterday and bought a newie after one on ebay went to $200 almost with postage. Put it ebay you might do ok.
Thanks again Matt.

 

[dagree]

No probs Matt,
Having a shed cleanout shortly so will more than likely put it, and other stuff, locally on gumtree.
Cheers,
David