14' Series Wall cavity behind kitchen sink

[Headingoutdoors]

Morning all.

I’m wanting to install a wall mounted water tang gauge above the kitchen sink (https://www.topargee.com.au/store/p45/H2F-FM_Water_Tank_Gauge​.html) but would like to know from the Jayco brains trust if there is enough room in the wall cavity to seat the Flush mounted model (above).

TIA.

 

[Drover]

Not really as your walls are not hollow they are a styro sandwich and you wouldn't be able to hide the cables inside the walls anyway.....better off if you can mount it on a cupboard wall/fridge wall where you can run the wires out of sight thru the floor or where ever your pump is hidden.

Thats a rough idea of what the wall is.........unless its a tin walled van then it's totally different..

 

[Headingoutdoors]

Thanks All.

I May be able to fit the gauge next to the light switches on the entry.

 

[Drover]

If they back onto a cupboard that's the perfect spot but make sure you can run the wiring hidden and that it will reach before you cut holes.....

 

[Crew family]

Our monitor is above our fridge, as plenty of room for wires there. It was put in during build though as an extra.

 

[Headingoutdoors]

Thanks all for your comments and tips. Pump installed and Water flow mete installed instead of a tank gauge.