Electrical 17.56-2 2012 Rear bed light not working

cmatten

New Member
Apr 28, 2019
1
0
1
Narara NSW 2250
My rear light bed light isn't working. Checked with DMM and it has no volts. All fuses look ok.

I've tried to chase the cable using an F-Set (Cable tracer) and can't find where it goes. Seems to go towards the shower side, I can't detect detect it anywhere along the side and it's not in the wires coming out from the front of the shower near the wheel arch.

Does anyone know which fuse it uses? If I know which fuse I will chase the cable towards the light.
 

willobee

Well-Known Member
Apr 8, 2015
235
374
63
46
Perth
Hi @cmatten I had a similar issue with my 16.49.4.
no blown fuses
It turned out to be a loose wire (unplugged) on the back of the setec.
the setec had worked loose out of the frame when the screws rattle loose obviously when i reinstalled I pulled the cable a bit which i didn't notice until after it was back in.
I have a mate who is an electrician, he pulled the setec out and we saw it straight away 10 min fix