Electrical Thetford Toilet Ventilator Installation

toheak

New Member
Mar 28, 2020
2
0
1
SWeden
Hello
Nice forum :)

After installing this kit the level indicator does not work work.
LED keeps flashing . Rest work OK.
Have tested the reeds with magnets . No change i LED behavior.
Tested reeds with magnets and multimeter, they works.
Any idas from you guys?
 

Bellbirdweb

Well-Known Member
Jan 24, 2014
1,921
2,746
113
Sydney
Hello
Nice forum :)

After installing this kit the level indicator does not work work.
LED keeps flashing . Rest work OK.
Have tested the reeds with magnets . No change i LED behavior.
Tested reeds with magnets and multimeter, they works.
Any idas from you guys?
Did your kit come with the replacement control panel ?

My original toilet only had the red LED when full, but the kit gave me a tank gauge with green yellow and red less showing the level.

I can only think the connection from the cassette is disconnected somewhere, perhaps a wire off somewhere ?
 

Bluey

Well-Known Member
Mar 31, 2014
2,651
3,817
113
Australia
@Bellbirdweb your lucky you had one light mine has never worked from new and still to this day after hole shower area was gutted toilet out everything all rebuilt under warrenty cause my plastic walls where comming off as nothing sticks to the plastic they use still dosnt work wish it did wall are now aluecomp very good but i only guess when its full
 
  • Like
Reactions: Bellbirdweb

Bellbirdweb

Well-Known Member
Jan 24, 2014
1,921
2,746
113
Sydney
@Bellbirdweb your lucky you had one light mine has never worked from new and still to this day after hole shower area was gutted toilet out everything all rebuilt under warrenty cause my plastic walls where comming off as nothing sticks to the plastic they use still dosnt work wish it did wall are now aluecomp very good but i only guess when its full
I must have got a Wednesday van, never had any issues with it in the 5 years I owned it.
I’m hoping the new Journey is as rock solid. So far so good.
 
  • Like
Reactions: Crusty181

Bluey

Well-Known Member
Mar 31, 2014
2,651
3,817
113
Australia
I must have got a Wednesday van, never had any issues with it in the 5 years I owned it.
I’m hoping the new Journey is as rock solid. So far so good.
It would have been soooooo good to bye yours but i carnt use the one ive got im useing it in a new way as a man cave its a very nice shed with tv and water and a beer fridge
 

toheak

New Member
Mar 28, 2020
2
0
1
SWeden
Did your kit come with the replacement control panel ?

My original toilet only had the red LED when full, but the kit gave me a tank gauge with green yellow and red less showing the level.

I can only think the connection from the cassette is disconnected somewhere, perhaps a wire off somewhere ?

Hello
The kit was with new panel and new REED pcb.
I have now tested with the old REED pcb and the flashing goes of when tank goes full.
Old REED pcb has only one swith that shorten hwen tank is full.
New REED pcb has two switches and some resistors.
Wire connection is OK

Regard
TommyÅ
thetford kit.JPG
 
Last edited: